- Plastic Recycling Machinery[3]
- Rubber Processing Machinery[3]
- Plastic Extruders[10]
- Other Plastic Processing Machinery[3]
- Other Industrial Filtration Equipment[1]
- Industrial Chiller[6]
- Industrial Air Conditioners[1]
- Plastic Crushing Machinery[7]
- Plastic Sheets[7]
- Plastic Welders[1]
- Packaging Machinery[2]
- Chemical Auxiliary Agent[10]
- Plastic Masterbatches[7]
- Sandwich Panels[7]
- XPS Boards[10]
- EPS Foam Boards[4]
- Contact Person : Ms. Teng Aivy
- Company Name : Nanjing Xuanpai Trading Co., Ltd.
- Tel : 86-25-52729698
- Fax : 86-25-52729698
- Address : Jiangsu,Nanjing,China,Jiangning,Nanjing,China
- Country/Region : China
- Zip : 210000
Automatic mold temperature controller
Mold temperature controller
1.This Mold Temperature Controller has been designed to maintain at a constant temperature the mould cavities, the hydraulic oil of the injection moulding machines, the extruder screws, the calibration heads, the cylinders and calenders of thermoforming lines. Water, oil and pressurized water models operate in a wide range of temperatures, form 20°C up to 250°C.
2. Mold Temperature Controller main specifications:
2.1 Power Source: AC 240V 3P 60 HZ
2.2 Temperature range:Normal temperature ~ 200°C
2.3 The precision of temperature control:±1°C
2.4 Oil pump power: 5.5KW
2.5 Oil pump flow:25m3/h
2.5 Oil pump head:37m
2.6 The heating power:60KW
2.7 The heating type:Japan import,Adding magnesium ,All stainless steel,explosion-proof,
No carbon heating tube.
2.8 Electrical parts: Schneider or Chint or OMROM Middle relay
2.9 The temperature control: OMROM PID full automatic control or PUMP PID full automatic touch Control.
2.10 Liquid level controller: Taiwan FINE Stainless steel.
2.11 Pipe connection: seamless steel pipe and stainless steel pipe.
2.12 Cooler: 250 square-feet heat exchanger
2.13 Cooling Method: indirect cooling
2.14 Heat medium oil inlet/outlet caliber :2"
2.15 Cooling water inlet/outlet caliber :4"
2.16 Cooling water inlet pressure :≥ 4kg
2.17 Cooling water inlet temperature:≤5°C
2.18 Cooling water valve: Japan CKD or Italy ODE
2.19 Terminal block: Germany Phoenix.
2.20 Electrical connector: Tanwan weizhe
2.21The heating barrel material: Seamless steel pipe ,the thickness is 6mm
2.22 Heat insulating layer thickness :10~20 mm(Aluminum silicate ,heat insulation,thermal insulation)
2.23 Weight of machine:It depends on the actual Weight.
2.24 overall dimension:It depends on the actual dimension.
2.25 The machine surface: Plastic spraying,baking varnish.
2.26 Protection &Safety system:mediainsufficient,anti-phase ,pump overload,overtemperature and so on.
3. Mold Temperature Controller applications:
A] Geared up for high-precision molding. Monitors temperature with 0.1°C accuracy and 0.5°C precision. Provides measuring range of 0.1%-1% digit. Attains 0.25sec of sampling cycle. New control algorithm to reduce transient overshoot.
B] Machine maintenance made easier. XP series (non-contact relay) of heater control circuit to achieve more than 10 years of lifetime. 4P pump to offer a longer lifetime. Corrosion-resistant piping system to prevent rusting and scaling.
C] Reduces heater on time by 8%. *120 degree setting when using water Higher control precision to improve operational efficiency. Heater pump sizes optimized for better performance and less energy consumption.(Heat exchange effectiveness, which depends on the mold size in use, is not necessarily maximized by heater pump capacities. Bigger heater pump consume more electric power, and may increase utility costs.)
D] Automated control offers safer operational environment. Non-fuse breaker with open-circuit voltage capability to secure safe operation environment. XP series for heater control to achieve more than 10 years of lifetime(compared to contactor's average lifetime of 1 year).
| Packaging Detail: | 1. Wooden cases 2. Wooden pallets 3. As request (if fumigation needed) |
| Delivery Detail: | 15 working days after deposit |
Automatic mold temperature controller
